Extending The Menu Display Time; Setting A Password - Canon ReallS SX80 User Manual

Extending the Menu Display Time

[Other settings] - [Menu display time]
HDMI
DIGITAL PC
ANALOG PC
Other settings
Menu display time
You can extend the menu display time,
which is 30 seconds usually, to 3 minutes.
Normal The menu is displayed for 30 sec-
onds.
Extended The menu is displayed for 3 minutes.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• You cannot extend the display time for
the window indicating the completion of
Auto setup (P46), the guide window
(P95), the lamp replacement window
(preparation) (P129), or the lamp
replacement window (warning) (P129).

Setting a Password

[Other settings] - [Password settings]
COMPONENT
VIDEO/S-VIDEO
USB
System settings
Disables the projector unless the correct
password is entered.
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
• You cannot set [On] unless you have com-
Once you set a password, the password entry
screen appears at power-on.
Enter a 4-digit password with [ ] / [ ] / [<] / [>].
If the password is valid, the projection starts. If
you enter a wrong passwords three times, the
power will be turned off.
97
Setting Various Function
HDMI
DIGITAL PC
ANALOG PC
Other settings
Password settings
Off The projector can be used even if no
password is entered.
On The projector cannot be used unless you
enter your password.
pleted [Register password].
To Cancel the Password
First, remove the power plug from the AC
outlet, and insert the power plug while
holding down the MENU button. After a
little, a beep sounds and the password
set is cancelled. (The registered pass-
word is also reset.)
COMPONENT
VIDEO/S-VIDEO
USB
System settings