Operating The Projected Image; Switching To The Next Image; Rotating An Image - Canon ReallS SX80 User Manual

Projecting an Image from a Digital Camera

Operating the Projected Image

When images are projected, you can perform the following operations.

■Switching to the Next Image

If you have specified multiple images for printing with the digital camera, you can switch
to the next image by pressing the OK button.
Remote control
• You cannot switch to the previous image with the projector operation. To switch to the
previous image, you must retry the print command with the digital camera.
• Even if a slideshow is running, you can switch to the next image by pressing the OK
button.

■Rotating an Image

You can rotate the image by 90 degrees to the left or to the right by pressing [<] / [>].
Remote control
Rotate by 90° to
• Even if a slideshow is running, you can rotate the image by pressing [<] / [>].
• If the image contains rotational information, the image is rotated to an appropriate
direction automatically.
Top control
Top control
[<]
the left
Rotate by 90° to
the right
106
[>]