Open Date SPRINT MAJOR Operator Instructions Manual page 36

Sprint Major - Digi60
Standard Warranty Terms & Conditions for Hot Foil
All Open Date Hot Foil Printers Carry a twelve (12) month return to base (at our discretion) warranty.
Open Date printers should be installed and operated according to the instructions given in the
operating manual. No liability will be accepted for faults caused by incorrect installation or operation
of the equipment or if the product has been altered or subjected to unreasonable use.
The following components are not covered by the warranty as they will be subject to wear and tear: -
1. Print base rubber.
2. Type characters, dies and rotary data-box wheels.
Should you have cause to claim for repair under warranty then please contact our service
department stating the model, serial number of the product and the nature of the problem or fault.
We reserve the right to charge for components replaced during the warranty period, which are
subsequently found to be damaged due to any of the above conditions not being followed.
Any items repaired or replaced under warranty will carry the balance of the original warranty period
only.
©2023 Open Date Equipment Limited All rights reserved.
REV A
Printers
February 2023
Page 36