Download Print this page

Open Date SPRINT MAJOR Operator Instructions Manual page 35

Hot foil printer with controller

Advertisement

Sprint Major - Digi60
Sprint Major Airborne Noise Emissions
Comprehensive tests have been carried out with the Sprint Major fitted in a standard printer
frame and mounted onto a typical label applicator. Measurements were taken at 1.6 metres
above floor level and approximately 1 metre away from the printer in all directions.
The measuring equipment used for conducting the tests was a Digital Sound Level Meter, type
d-1405E supplied by Lucas CEL. Before the tests were carried out the instrument was
calibrated and fitted with a foam windshield.
The results shown below are based upon a standard type installation for the printer, the
operating air pressure was set at 6 bar and the air flow restrictors correctly adjusted.
The noise levels shown below are the equivalent continuous "A-weighted" sound pressure
levels in decibels "dB(A)".
PRINTS PER MINUTE
50
100
150
200
©2023 Open Date Equipment Limited All rights reserved.
REV A
NOISE LEVEL - DECIBELS
February 2023
(dB)
65
67
70
71
Page 35

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPRINT MAJOR and is the answer not in the manual?

This manual is also suitable for:

Digi-60