Icom IC-821H Instruction Manual page 23

FREQUENCY SETTING 3
W Sub tuning dial
The transceiver has a large main tuning dial for @) Set the [RIT] or [SHIFT] control for the desired
frequency setting. In addition, the [RIT] or [SHIFT] tuning direction and speed.
controls can be used as a sub tuning dial for dual - Tuning speed can be adjusted in +5 steps.
band simultaneous tuning, etc. The sub tuning dial
variable speed.
Reverses the Advances the
frequency and Ta frequency and
To use the sub tuning dial function, assign the func- increases the ve a increases the
tion to either the [RIT] or [SHIFT] control using the speed. eon speed.
set mode with the [RIT] switch as described below.
The assigned control can be used for its original l
function, however, both functions cannot be used @ Push the [RIT] switch to cancel the function.
simultaneously.
SSS
While pushing the [MEMO] switch, the sub tuning
dial changes the memory channel.
WS
@ Assign the function to the [RIT] or [SHIFT] control
and the effect to the accessed band or sub band.
- See the box below.
© Push [RIT] for 2 sec.
- "RIT" blinks when the sub tuning dial function is
activated.
Shr SUFOA
ZANT VFO A
FM
yJJuvuu i
The display shows the assigned function is activated.
e Sub tuning dial function assignment
@) Rotate the tuning dial to select the desired
condition as described below.
@ Push [SPCH*SET] for 2 sec. to enter the set @ Push [SPCH] to exit set mode.
mode.
- "SEt" appears.
% NOTE: When the same functions are assigned to
@ io [RIT] bt a the [RIT] or [SHIFT] control Z the both [RIT] and [SHIFT], only the [RIT] control
tO De ASN: g is functional.
- "rit nob" or "SFt nob" appears.
t 1900
The [RIT] control functions as [RIT] even when the sub tuning
dial function is activated. (default)
t noo
ren c
wre GFE nob
The [SHIFT] control functions as [SHIFT] even when the sub
tuning dial function is activated. (default)
'The annie control can be used for sub band IF shift control.
See the IF shift function for details. (p. 22)
The [SHIFT] control can be used for sub band IF shift control.
20