Shut Down Procedures - LIVOLTEK Hyper-2000 User Manual

7.3 Shut down Procedures

For maintenance or other service work, the inverter must be switched off. Proceed as follows to
disconnect the inverter from the AC and DC power sources.
Notes: Please strictly follow the following procedure. Otherwise, it will cause lethal voltages or
unrecoverable damage to the inverter.
Step1: Turn off the loads;
Step 2: Turn off the PV;
Step 3: Turn off battery;
Step 4: Turn off the main grid switch;
Step 5: Wait for at least 5 minutes after the LED and graphical display black out for the internal
circuits to discharges energy;
Step 6: Disconnect all the power cables;
Step 7: Disconnect all the communication cables, Remove the Wi-Fi stick;
Step 8: Remove the inverter from the wall, also remove the bracket if necessary;
Step 9: Pack the inverter with the original carton, and store it.
52