Table of Contents
Advertisement
Installation
5.
5.1 Installation Requirements
Make sure there is no electrical connection before installation.
•
•
In order to avoid electric shock or other injury, make sure that holes will not be drilled
over any electricity or plumbing installations.
•
Always follow the instructions when moving or positioning the inverter.
•
Improper operation may cause injuries or serious wounds. In the case of poor
ventilation, the system performance may compromise.
5.1.1
Location Requirements
Select an optimal mounting location for safe operation, long service life and expected
performance.
No direct sunlight
Direct sunlight
Note:
•
AVOIDE direct sunlight, rain exposure, snow laying up during installation and operation.
•
•
DO NOT install the inverter in a place where personnel are likely to come into contact with
its enclosure and heat sinks because these parts are extremely hot during operation.
NOTICE
No rain exposure
Rain exposure
19
No snow lay up
Snow lay up
Advertisement
Table of Contents
Need help?
Do you have a question about the Hyper-2000 and is the answer not in the manual?