Safety Precaution; Personnel Requirements; Inverter Safety - LIVOLTEK Hyper-2000 User Manual

Safety Precaution

2.
• The inverter has been designed and tested strictly in accordance with international
safety regulations. As with all electronic equipment, there are residual risks despite
careful construction.
• Read all safety instructions carefully prior to any work and observe them at all
times when working on or with the inverter to prevent personal injury and property
damage and to ensure long-term operation of the inverter.
• Ensure that the equipment is used in environments that meet its design
specifications. Otherwise, the equipment may become faulty, and the resulting
equipment malfunction, component damage, personal injuries, or property damage
are not covered under the warranty.
• Follow local laws and regulations when installing, operating, or maintaining the
equipment. The safety instructions in this document are only supplements to local
laws and regulations.

2.1 Personnel Requirements

• The inverter must be installed, electrically connected, operated and maintained by
specially trained and qualified electrician.
• The qualified persons who plan to install or maintain LIVOLTEK equipment must
receive thorough training, understand all necessary safety precautions, and be able
to correctly perform all operations.

2.2 Inverter Safety

Danger to life due to electric shock when live components are touched on opening
the product.
• High voltages are present in the live parts and cables inside the product during
operation. Touching live parts and cables results in death or lethal injuries due to
electric shock.
Do not open the inverter cover or change any components without manufacturer's
•
authorization. Otherwise, the warranty for the inverter will be invalid.
Danger to life due to fire or explosion.
• In rare cases, an explosive gas mixture can be generated inside the product under
fault conditions. In this state, switching operations can cause a fire inside the
product or explosion. Death or lethal injuries due to hot or flying debris can result.
• In the event of a fault, do not perform any direct actions on the product.
• Ensure that unauthorized persons have no access to the product.
• Only perform work on the product when wearing personal protective equipment
for handling of hazardous substances.
• Wait at least 10 minutes for the internal capacitors to discharge after the battery
is powered off.
Ensure that there is no voltage or current before installing or disconnecting any
•
connectors.
• All safety instructions, warning labels, and nameplate on the inverter should not
DANGER
WARNING
2