LIVOLTEK Hyper-2000 User Manual page 20

4.2.2 Compliance and Safety Symbols
Symbol Explanation
CE marking
The product complies with the requirements of the applicable EU directives.
UKCA marking
The inverter complies with the requirements of the applicable UKCA guidelines.
UKNI marking
The inverter complies with the requirements of the applicable UKNI guidelines.
Caution! Beware of a danger zone!
Failure to observe any warnings contained in this manual may result in injury.
Danger! Beware of hot surface!
The inverter can become hot during operation.
Danger! Beware of high voltage and electric shock!
Beware of electrical voltage, the product operates at high voltages.
Observe the documentation.
Observe all documentation supplied with the product.
WEEE designation.
Do not dispose of the product together with the household waste but in
accordance with the disposal regulations for electronic waste applicable at the
installation site.
RCM marking
Regulatory compliance mark.
Danger to life due to high voltage and electric shock!
There are residual voltages in the inverter after powering off, you should wait at
least 5mins after disconnecting the inverter from the utility grid and from the PV
panel before touching any inner live parts.
Note: The table shown here is for reference only. The actual product received may differ.
17