Zapi EPS-AC0 SWs&ENC User Manual page 74

-
-
Depending by your arrangement, three couples of consistent settings are
possible:
0 or 1 if you have one toggle switch.
2 or 5 if you have two concordant toggle switches.
3 or 4 if you have two discordant toggle switches.
By switching between the two values inside each couple, the steered wheel
turns 180 degrees.
AUX FUNCTION 11 manual setting (see 10.3) deals about a simplified setting
procedure.
Page - 74/95
OFF and ENDSTROKE ACW (corresponding to CNA#2) is
ON when the WHEEL ANGLE is in the window 0 to 90
degrees).
LEVEL 4: two toggle switches in the straight ahead and 90 degrees
position. ENDSTROKE CW (corresponding to CNA#3) is ON
and ENDSTROKE ACW (corresponding to CNA#2) is OFF
when the WHEEL ANGLE is in the window 0 to 90 degrees).
LEVEL 5: two toggle switches in the straight ahead and 90 degrees
position. ENDSTROKE CW (corresponding to CNA#3) and
ENDSTROKE ACW (corresponding to CNA#2) are both ON
when the WHEEL ANGLE is in the window 0 to 90 degrees).
AEMZP0EA - EPS-AC0 SWs&ENC - User Manual