Zapi EPS-AC0 SWs&ENC User Manual page 16

1) CONTELEC twin hall sensors 170° Type code VERT-X 2841 417 225.
2) BOURNS twin potentiometers 180° Type Code 6657S-466-502.
3) MCB twin potentiometers 85° Type Code PMR 410 or PMR426.
The CONTELEC is without brushes but drains a high level of current (about 15 mA).
The MCB has the advantage of a spring in the shaft. This spring neutralizes the
dead zone in the tiller side getting a strongly accurate straight-ahead matching;
unfortunately MCB has a limited angle (85°).
Obviously, the above information states only these parts are suited for the eps-ac0;
no reliability evaluation is given here.
Other sources are possible on request, but must be tested for approval.
Page - 16/95 AEMZP0EA - EPS-AC0 SWs&ENC - User Manual