Assembly - Home Decorators Collection CELENE II Use And Care Manual

Assembly

1
Preparing the canopy
□ Remove the canopy bottom cover (C) from the canopy (B)
by turning the canopy bottom cover (C) counterclockwise.
□ Remove the mounting bracket (A) from the canopy (B) by
loosening canopy mounting screws (EE) a half turn from
the screw head. Next, turn the canopy (B) counterclockwise
to remove the mounting bracket (A) from the canopy (B).
EE
2
Attaching the fan blades
□ Begin by using the original product packaging to create a
base to hold the fan. Place the fan motor (F) with the
bottom facing up.
□ Bring a fan blade (G) to the motor and ensure that "THIS
SIDE TOWARDS CEILING" sticker is facing downward. Slide
the blade (G) into the slot on the motor and align with those
holes underneath.
□ Place a blade support plate (H) with screws over the holes
and tighten all screws securely. Repeat the process for an
A additional six blades (G). DO NOT install the nal blade as
this will leave you an opening to wire the fan later on.
EE
G
B
C
7
H
Pulp packaging
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
F