Table of Contents
Advertisement
Quick Links
Item #1001 668 630
Model #CL11012
USE AND CARE GUIDE
AMARETTO 70 INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday
1-800-986 3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection CL11012
Summary of Contents for Home Decorators Collection CL11012
- Page 1 USE AND CARE GUIDE AMARETTO 70 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986 3460 HOMEDEPOT.COM/HOMEDECORATORS...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ............2 Safety Information ............3 Warranty .................4 Pre-installation .............. Specifications ................Tools Required ................. Hardware Included ..............Package Contents ..............Installation ..............Assembly ............... Hanging the Fan ..............Attaching the Fan Blades ............Installing the Light Kit ............Operation .............. -
Page 3: Safety Information
Safety Information □ Read and save these instructions. WARNING: To reduce the risk of electrical shock or fire, do □ To reduce the risk of electric shock, ensure electricity has not use this fan with any solid-state fan speed control device. It will permanently damage the electronic circuitry. -
Page 4: Warranty
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two year after the date of purchase by the original purchaser. -
Page 5: Hardware Included
Pre-Installation (continued) HARDWARE IN CLUDED NOTE:Hardware shown to actual size unless noted otherwise in the table below. Part Descriptio n Quantity Blade screw Fiber washer (not to scale) Blade holder screw Flywheel screw Light shade bracket screw Wire nut（P2） Cross pin (not to scale) (preassembled) Hitch pin (preassembled) Lock pin (not to scale) (preassembled) Hanger ball set screw (preassembled) -
Page 6: Package Contents
Pre-Installation (continued) PACKAGE CONTENTS Part Descriptio n Quantity Part Descriptio n Quantity Blade Light kit plate Mounting bracket 26W LED asembly Canopy Light shade bracket Canopy cover Metal cap (preassembled) Hanger ball (preassembled) Finial (preassembled) Downrod (preassembled) Glass shade Coupling cover Receiver Fan motor assembly Remote control... -
Page 7: Installation
Installation MOUNTING OPTIONS WARNING:To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. -
Page 8: Assembly
Assembly -Hanging the Fan Attaching the downrod to the Attaching the mounting bracket to fan motor assembly the electrical box □ Loosen the two set screws (KK) from the fan motor WARNING: To reduce the risk of fire, electric shock, or assembly (H) coupling. - Page 9 Assembly -Hanging the Fan (continued) Attaching the coupling cover, canopy Hanging the fan motor assembly to the mounting bracket cover, and canopy to the downrod □ Slip the coupling cover (G), canopy cover (D), and canopy □ Lift the fan motor assembly (H) into position, and place the (C) onto the downrod (F).
- Page 10 Assembly -Hanging the Fan (continued) Making the electrical connections WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the main fuse box before wiring. WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the circuit breaker or main fuse box before wiring.
- Page 11 Assembly -Hanging the Fan (continued) Securing the fan motor assembly to the mounting bracket □ Remove one screw (LL) from the mounting bracket (B) and loosen the other screw (LL) approximately 1/4 turn. □ Carefully raise the canopy (C) up to the mounting bracket (B), and ensure the loosened screw (LL) is inserted into the key hole on the canopy (C).
-
Page 12: Attaching The Fan Blades
Assembly -Attaching the Fan Blade Assemblies Fastening the blade assemblies to the fan motor assembly □ Attach the fan blades (A) to the blade holders (J) by using three blade screws (AA) and fiber washers (BB). Tighten screws (AA) and fiber washers (BB) securely. □... -
Page 13: Installing The Light Kit
Assembly -Installing the Light Kit Attaching the light kit plate Attaching the 26W LED Assembly to the mounting ring to the light kit plate □ Remove one of three screws (MM) from the fan motor □ Remove one of four screws (NN) from the light kit assembly (H) mounting ring, and loosen the other two plate (K), and loosen the other three screws (NN), but do screws (MM), but do not remove. - Page 14 Assembly -Installing the Light Kit(continued) Attaching the light shade Installing the glass shade bracket to the mounting ring □ Remove the rubber washer (PP), metal washer (QQ), □ Place the glass shade (P) over the light shade bracket hex nut (RR), metal cap (N) and Finial (O) from the (M) stem, and secure with the rubber washer (PP), light shade bracket (M).
-
Page 15: Operation
Operation Installing the batteries CAUTION: Do not use with a wall light dimmer switch. NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the remote control. Dispose of used battery properly and keep the battery out of the reach of children. - Page 16 Operation (continued) Learning process NOTE: The control system for this DC motor fans is equipped with a learning frequency function which has 16 code combinations to prevent potential interference from other remote units. The frequency on your Receiver and Transmitter units have been preset at the factory.
- Page 17 Operation (continued) 1.Fan button. - Press and release the button to turn the fan on or off. NOTE: The fan has memory function , it will resume the speed setting on the fan prior to the power being turned off. And The LED bar will display the speed settings for 5 seconds after the button is released.
- Page 18 Operation (continued) Setting 3 3. Comfort breeze Setting 2 There are three Comfort breeze settings. Pressing the button will Setting 1 activate the Comfort breeze mode. □ Setting 1: Alternates through speeds 1-3. □ Setting 2: Alternates through speeds 4-6. □...
-
Page 19: Care And Cleaning
Care and Cleaning Do not □ Check the support connections, brackets, and blade □ Do not use water when cleaning. Water could damage the attachments twice a year. Ensure they are secure. motor, or the wood, or possibly cause an electrical shock. Because of the fan’s natural movement, some connections may become loose over time. -
Page 20: Troubleshooting
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 10. Probl em Solutio n □Check main and branch circuit fuses or breakers. The fan will not start. -
Page 21: Service Parts
Service Parts Part Description Part Description Blade Blade screw Mounting bracket Fiber washer Canopy Blade holder screw Canopy cover flywheel screw Hanger ball Light shade bracket screw Downrod Wire nut (P2) Coupling cover Cross pin Hitch pin Fan motor assembly Flywheel Lock pin Blade holder... - Page 22 Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986 3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Need help?
Do you have a question about the CL11012 and is the answer not in the manual?
Questions and answers