Table of Contents
Advertisement
134
RAID configuration utilities
RAID option for the Altos R520 M2 system is provided through either
the onboard SATA controller or through an external controller board
option (LSI MegaRAID SAS 8708EM2 RAID controller or Promise SAS
TX4652 RAID controller).
Caution: Creating a RAID volume erases all data previously saved
in the hard drives. Make sure that you back up important files
before starting a RAID configuration process.
Onboard SATA RAID Configuration Utility
This section explains how to create a RAID 1 volume using the onboard
SATA controller.
To enable the onboard SATA RAID controller:
1
Turn on the server and the display monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press F2 to access the BIOS Setup Utility.
3
Select the Advanced | SATA Configuration submenu.
4
Change the setting of the SATA RAID Enable field from Disabled to
Enabled.
5
Press F10.
6
Select Yes to save the new SATA RAID settings and close the Setup
Utility.
Appendix A: Server management tools
Advertisement
Table of Contents
Troubleshooting
