HySecurity SlideSmart DC Technical Instructions page 7

Change Charging Type to Solar: S.T.A.R.T. Software
CAUTION
Setting the charger type affects operator performance. Ensure proper charger type for the gate operator used.
1. Navigate in the START software to the Part 2 tab of the Installer Menu (FIG-8).
2. Set the Charger Type to Solar.
3. Save the menu settings, exit, and disconnect from the operator.
4. Assemble chassis cover to operator and return to service.
FIG-8: START Software - Installation Menu Power Settings
---------------------------------------------------------------- END -----------------------------------------------------------------
support.hysecurity.com
Technical Instructions
NOTICE
The instructions below show how to set the charger type using
the START softeware
but not how to install or use the software. The START software
and documentation may be downloaded from
hysecurity.com/hc/en-us/sections/360007580273-HySecurity-S-T-
A-R-T-software-for-Smart-Touch-and-SmartDC.
Instructions: Converting SlideSmartDC from AC to Solar Power
(Smart Touch Analyze and Retrieve Tool),
Charger Type
> Solar
https://support.
7
D1131 Rev. B ©2022