User Parameters - Omtech PRO 2440 User Manual

5.9.7 User Parameters

Return Submenu
Parameters
work return to
Enable Z Dock
X Dock position(mm)
Y Dock position(mm)
Z Dock position(mm)
Reset Submenu
Parameters
Reset to
X Pwr on reset Ena
Y Pwr on reset Ena
Z Pwr on reset Ena
U Pwr on reset Ena
Options Functions/Meanings
Origin pos Sets the laser head to return to the default origin.
ABS position Sets the laser head to return to the mechanical origin.
Docking Point Sets the laser head to return to the preset origin(s)
Not return Keeps the laser where it is.
Enable/Disable
Enables and disables the laser head's return to a set Z coordinate
Numerical Sets the laser head to return to a set X coordinate.
Numerical Sets the laser head to return to a set Y coordinate.
Numerical Sets the laser head to return to a set Z coordinate.
Options Functions/Meanings
Origin pos
Sets the laser head to return to the default origin.
ABS position Sets the laser head to return to the mechanical origin.
Docking Point Sets the laser head to return to the preset origin(s)
Not return Keeps the laser where it is.
Enable/Disable Sets the laser head to its X origin upon powering up.
Enable/Disable
Sets the laser head to its Y origin upon powering up.
Enable/Disable
Sets the laser head to its Z origin upon powering up.
Enable/Disable Disabled
56