Module Configuration And Product Models; Standard Module Configurations - Enclustra Mercury+ XU6 User Manual

On‐board clock generation is based on a 33.33 MHz crystal oscillator. In addition, the module is equipped
with two oscillators delivering 100 MHz and 27 MHz reference clocks for the MGT GTR lines.
The module's internal supply voltages are generated from a single input supply of 5 ‐ 15 V DC. Some of
these voltages are available on the Mercury module connectors to supply circuits on the base board.
Six LEDs are connected to the MPSoC pins for status signaling.
2.2

Module Configuration and Product Models

Table 1 describes the available standard module configurations. The product model indicates the module
type and main features. Figure
are available. Contact Enclustra for more information.
Product Model
ME‐XU6‐2CG‐1E‐D10H
ME‐XU6‐2EG‐1I‐D13E
ME‐XU6‐3EG‐2I‐D11
ME‐XU6‐4CG‐1E‐D12
ME‐XU6‐4CG‐1E‐D13
ME‐XU6‐4EV‐1I‐D12
ME‐XU6‐4EV‐1I‐D12E
ME‐XU6‐4EV‐1I‐D13E
ME‐XU6‐5EV‐2I‐D12E
Table 1: Standard Module Configurations
1
1
This variant supports only half of the DDR4 bandwidth on the PS side ﴾32‐bit interface instead of 64‐bit﴿. Refer to Section
for details.
D‐0000‐464‐001
2 describes the fields within the product model. Custom configurations
MPSoC
1
XCZU2CG‐1SFVC784E
XCZU2EG‐1SFVC784I
XCZU3EG‐2SFVC784I
XCZU4CG‐1SFVC784E
XCZU4CG‐1SFVC784E
XCZU4EV‐1SFVC784I
XCZU4EV‐1SFVC784I
XCZU4EV‐1SFVC784I
XCZU5EV‐2SFVC784I
DDR4 ﴾PS﴿
SDRAM
1 GB
8 GB
2 GB
4 GB
8 GB
4 GB
4 GB
8 GB
4 GB
11 / 60
DDR4 ﴾PS﴿ Temperature
ECC Range
0 to +85 C
‐40 to +85 C
‐40 to +85 C
0 to +85 C
0 to +85 C
‐40 to +85 C
‐40 to +85 C
‐40 to +85 C
‐40 to +85 C
Version 03, 24.10.2023
2.14