Omron NS-RUNTIME - SOFTWARE User Manual page 25

System Settings and Project Properties
Item
Changing value
of Device Monitor
Specifying a save
destination of history
data
Video
Printer Settings
Pop-up Menu
Advanced PT
operation settings
NT compatibility for
system memory
Initializing system
memory at startup
Connecting to a serial
port while ignoring
communications
errors on the other
serial port
Screen saver startup
time
Function keys
N o t e
N o t e
N o t e
The NS-Runtime does not support the Device Monitor. However the CX-Programmer and the
Switchbox Utility can be started up from the NS-Runtime. They can be substituted for NS Series
Device Monitor, Ladder Monitor and Programming Console.
The procedure for installing a printer driver in Windows XP differs from the NSA Series. When
using a printer with the NSA Series, please contact your OMRON representative.
1-4 Comparison between the NS Series and the NS-Runtime
NS Series
Set whether
enable/disable to
change value from
device monitor
No specification function.
Make video display settings
including selecting video board
Make settings of a printer to
connect with the PT.
Show Delimiter is supported.
Option settings are supported
for switching screens.
It is possible to select system
memory allocations compatible
with the NT-series PTs.
It is possible to select either
starting up with the previously
displayed screen and label
number, or starting up with the
startup screen set in the
system settings and the labels
set in the project properties.
It is possible to select either
displaying "Connecting" when
serial port A or B has not
connected at startup, or to go
ahead and perform
communications with only the
host that is connected.
The startup time of the screen
saver can be indirectly
specified.
The Key Status Notification
Address can be set (NS15
only)
NS-Runtime
Other than NSA
NSA Series
The NS-Runtime does not support the
device monitor function.
Specify a folder to save data.
The NS-Runtime does not support the
video display function.
No printer setting. (Printer specified with
the operating system will be used.)
No Show Delimiter function
Not Provided.
Not Provided.
Not Provided.
With the NS-Runtime, the startup screen
set in the system settings and the labels
set in the project properties are always
used at startup.
Not Provided.
With the NS-Runtime, only graphics,
labels, and other parts that do not require
communications will be displayed if serial
port A or B is not connected.
Not Provided.
Not Provided.
Series
1-11