Omron NS-RUNTIME - SOFTWARE User Manual page 23

N o t e
N o t e
N o t e
Data from other devices can be accessed from an application on a computer by going through
the networks. This is referred to as SPMA (Single Port Multi Access).
To communicate on a Controller Link network, a 3G8F7-CLK21-V1, 3G8F7-CLK12-V1, or
3G8F7-CLK52-V1 Controller Link Support Board must be installed in advance in the NS-
Runtime's operating environment. Refer to the Controller Link Support Boards for PCI Bus
Installation Guide (Cat. No. W467) for information on mounting and setting methods.
To communicate on an Ethernet network, set the conversion table in the communications
settings of the CX-Designer.
Host Link connections are not supported for CJ2 CPU Units.
NS-Runtime Overall Operations
Item
Project Startup
Exiting projects
Inputting characters
and numerals using a
hardware keyboard
1-4 Comparison between the NS Series and the NS-Runtime
NS Series
Power ON
Power OFF
Not Supported.
NS-Runtime
NSA Series
-
- Exits from the system menu or by operating
screen.
- Turns ON the system memory $SB63
The system menu has below two exit functions.
- Exits the NS-Runtime only
(Operating system will not end)
- Exits the NS-Runtime and operating system. (The
system ends.)
Possible when a
hardware keyboard is
mounted.
Other than NSA Series
Executes the NS-Runtime
Supported.
1-9