Table of Contents
Advertisement
Operation Log Recording Method
This function is used to display the method for recording the operation log.
The operation log recording method is read only and cannot be edited.
This operation log recording method is set from the CX-Designer.
If the Use Ring Buffer is set, when the specified number of items is exceeded, the oldest
data is deleted and the new data is recorded.
If the log is not saved in ring buffer format, the PT stops collecting log data when the
specified number of items has been reached. Initialize the operation log to reopen the record.
N
o
t
e
N
o
t
e
N
o
t
e
For details on the operation log, refer to Initializing and Saving the Operation Log in this
manual and 2-20-1 Operation Log Function in the NS Series Programming Manual.
Error Log Recording Method
This function is used to display the error log recording method.
The error log recording method is read only and cannot be edited.
The use of a ring buffer for the error log recording method is fixed.
When the maximum number of items is exceeded, the oldest data is deleted and the new
data is recorded.
N
o
t
e
N
o
t
e
N
o
t
e
For details on the error log, refer to Initializing and Saving the Error Log in this manual and 2-
20-4 Error Log Function in the NS Series Programming Manual.
System Memory
The allocated location in the host and address is displayed in the System Memory ($SB and
$SW) and cannot be edited.
N
o
t
e
N
o
t
e
N
o
t
e
Refer to 2-4 System Memory in the NS Series Programming Manual for details on the system
memory.
5-6 Initialization/Setting Screen
5-33
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the NS-RUNTIME - SOFTWARE and is the answer not in the manual?