Setting The Alarm Function; Setting Celsius Or Fahrenheit; Outside Temperature - LEXIBOOK SM1102 Manual

SM1102 English 7/2/04
4. To select the 12-hour or 24-hour format, press AM/PM.
5. The time must be in configuration mode (the clock flashes).
6. Press the Mode button to confirm the selection.
1. Press the Mode button (while the clock is displayed) to display the alarm function.
The " " symbol will appear.
2. Press the Hour button as many times as necessary to select the desired hour.
3. Press the Minute button as many times as necessary to select the desired minute.
4. Press the Alarm button to turn the alarm on or off. Its state is indicated by the AL
symbol.
5. If the alarm function is on, the alarm will sound at the specified time. Pressing the
Mode button will activate the snooze function, and the alarm will then sound again
five minutes later. Pressing any other button will deactivate the alarm.
6. Press the Mode button three times to display the clock.
This model contains two temperature scales, degrees Celsius and degrees Fahrenheit.
To choose either scale, press the °C/°F button. The temperature display will then switch
from Celsius to Fahrenheit, or vice versa.
The SM1100 weather station can accommodate up to four remote units. You can
purchase one or more optional transmitters on the site www.lexibook.com.
Displaying the outside temperature and humidity
The outside temperature and relative humidity (remote unit 1) are displayed continuously
on the screen in alteration. Press the Channel button to display the temperature
readings for the other, optional transmitters.
IF THE SCREEN DOES NOT UPDATE THE TEMPERATURE BEING READ BY THE
REMOTE UNIT, HOLD DOWN THE CHANNEL BUTTON FOR FIVE SECONDS. THE
TEMPERATURE WILL BE UPDATED AUTOMATICALLY.
Copyright © Lexibook 2002
4:21 PM Page 7

SETTING THE ALARM FUNCTION

SETTING CELSIUS OR FAHRENHEIT

OUTSIDE TEMPERATURE

7