Clock And Alarm Settings - LEXIBOOK Meteo Clock Elegance First SM1840 Owner's Manual

USING THE TEMPERATURE PROBE:
1. It is recommended use the temperature probe to sense the temperature when the
outside temperature is between the range: -50°C ~ 0°C and +50°C~+70°C
2. When the outdoor temperature is below -20 °C, it is mandatory to use the probe
outside and place the sensor unit indoors to avoid freezing the battery
3. To use the probe, insert the probe plug on the bottom right hand side of the remote sensor.
BACK LIGHT:
To use the back light, press [A19], located below the main unit LCD display. The back light stays on for
5 seconds.
Manual Time and Date Setting:
If the SM1840 is brought outside the range of the Frankfurt DCF77 radio signal or if the signal is
interfered, please set the time and date manually according to the instructions below. If the unit is
located within the radio-controlled range, you may want to customize some of the clock settings such
as the language of the day of the week.
1. The setting sequence is displayed in the order:
Hours ➞ Minutes ➞ Seconds ➞ Year ➞ Month/Day sequence ➞ Month ➞ Day ➞ Time Zone
➞ Day-of-week language.
2. Press and hold [B4] to enter the manual Clock/Calendar setting mode.
3. Time and date: Press the "+" [B10] or "-" [B11] buttons to adjust the settings and press [B4] to
confirm each setting.
4. The month and day sequence gives you the option to select whether the month or the day is
displayed first.
5. Time Zone: If you receive no radio-control signal, the time zone should be set to 0. The time zone is
used in countries which can receive the radio-control signal but are not located in the GMT+1 zone
(Madrid, Paris, Roma, Berlin time zone). For example, if your home country is located in GMT+2
(like Finland, Greece, Turkey, Roumania,...), you should set the time zone to 1.
Copyright © Lexibook 2005

CLOCK AND ALARM SETTINGS

9