Icom IC-820H Instruction Manual page 41

(5) RIT variable range (SSB/CW) 'rit'
The variable range of the RIT function for SSB/CW
mode can be set to the following values:
@ 0.1 kHz (100Hz)... tuning resolution: 1 Hz
tuning resolution: 10 Hz
tuning resolution: 20 Hz
(6) RIT variable range (FM) "rit"
The variable range of the RIT function for FM mode
can be set separately from SSB/CW mode io the
following values:
tuning resolution: 10 Hz
tuning resolution: 50 Hz
tuning resolution: 100 Hz
(7) Sub tuning dial function "SubdlAL'
The sub tuning dial function tunes a frequency
without the tuning dial. This function can be as-
signed to the [RIT] or [SHIFT] contro! to suit your
operating preference.
When assigning this function to the [RIT] control, the
"RIT" indicator in the function display blinks during
operation.
(8) Optional voice synthesizer "SPEECH"
When an optional UT-36 VOICE SYNTHESIZER UNIT
is installed the selected frequency, mode and se-
lected VFO or memory channel are announced
when the lock function is activated.
When you want to cancel the announcement without
removing the UT-36, for silent operation, set this
item to "oFF."
SETMODE 12
my o3
aid
+0.1 KHz range /1 Hz steps
173
4, | r :
+1 kHz range / 10 Hz steps (default)
|
5,04
+1 kHz range / 10 Hz steps
Er
i) rieé
+5 kHz range / 50 Hz steps (default)
7
j
+10 kHz range / 100 Hz steps
Sub cll FF
For the sub band with the [RIT] control (default
c,
tr
Welbe
fur
For the accessed band with the [SH
| my
Optional voice synthesizer ON (default
pn mnt
Optional voice synthesizer OFF