Icom IC-820H Instruction Manual page 31

fi Memory channel allocation
The transceiver has a total of 100 memory channels.
There are 50 channels for each band initially.
When you want more channels for a particular band,
the number of memory channels can be allocated in
10 channel steps.
e Allocation operation
@) Turn the power OFF.
(2) While pushing [LOCK], turn power ON.
- The L-set mode is accessd.
[POWER]
os = ae
O coc oO
Mc 2©
© Oss 5
eee T Ome
on bfe A
One of the L-set mode displays appears.
(3) Push [DOWN] or [UP] to select the channel
allocation display.
Channel allocation display
Select item 12
MEMORY MODE 8
Ye Nearee in 10-channel steps from the higher
Memory channels removed
() Rotate the tuning dial to select the desired num-
ber.
- "L" stands for the 144 MHz band
"H" stands for the 430 MHz band.
144 MHz band: 80 430 MHz band: 20
|
144 MHz band: 70 430 MHz band: 30
144 MHz band: 30 430 MHz band: 70
144 MHz band: 20
(©) Push [POWER] to turn power OFF, then turn
power ON again to exit the L-set mode.
- The selected allocation is programmed.
430 MHz band: 80
32