Icom IC-820H Instruction Manual page 37

SCANS 11
) Push [VFO] to select the VFO made.
(2) Select the desired operating mode.
~The operating mode can also be changed while
scanning.
(3) Set the main band's [SQL] open or closed.
- For FM mode, squelch must be closed.
- See page at left for scan condition.
(4) Push [SCAN] to start the scan.
- "SCAN" appears while scanning.
(6) When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume
setting and the squelch condition.
el ramen)
D008
@Set squelch. @ Select operating mode.
- During scan, the [KHz/MHz] switch can be used. [DISPLAY EXAMPLE DURING A SCAN]
(6) To cancel the scan, push [SCAN].
FM VFOA
NOTE: If the same frequencies are programmed into Hee Ee eee, cA
the scan edge memory channels P1 and P2, pro- a = ued raion
grammed scan does not start. "SCAN" appears.
(1) Push [MEMO] to select the memory mode.
(2) Rotate the main band's [SQL] to close the squelch. Select the
(3) Push [SCAN] to start the scan. @ Start. © Stop. memory mode.
- "SCAN" appears.
(@ When the scan detects a signal, the scan stops or
pauses depending on the scan resume setting.
(6) To cance! the scan, rotate the tuning dial, or push
[SCAN].
NOTE: 2 or more memory channels must be pro-
grammed for memory scan to start. @ Close squelch.
mi Mode select memory scan operation
(}) Push [MEMO] to select the memory mode.
(2) Select the desired mode (USB, LSB, CW or FM).
3) Rotate the main band's [SQL] to close the squelch.
() Push [LOCK] as a pre-operation for the mode
select memory scan.
(6) Push [SCAN] to start the scan.
- While scanning, the "select mode" may be changed by
pushing a mode switch, [FM] or [SSB/CW].
) Select the
©®Start. ©Stop. memory mode.
(6) When the scan detects a signal, the scan stops or
pauses depending on the scan resume setting.
@ To cancel the scan, rotate the tuning dial, or push @ Close squelch. @ Select the desired
SB, LSB
[SCAN].
® Push [LOck\,
ah
NOTE: 2 or more memory channels must be pro-
grammed with the same operating mode for select
memory scan to start.
38