Icom IC-820H Instruction Manual page 35

The transceiver has 1 satellite VFO and 10 satellite
memory channels to memorize both uplink and down-
link frequencies.
SATELLITE VFO MODE
The satellite VFO mode records set frequencies and
modes each time they change. Use the satellite
VFO mode for finding satellites easily.
Satellite mode selection
When satellite mode is selected, a satellite memory
channel or satellite VFO appears. When you have
set frequencies in normal VFO made, the set fre-
quencies can be transferred to the satellite VFO.
Norm
mode is selected.
(1) Select the satellite mode. |
-Push [FUNC] then push (or push and hold)
[DOWN-REV] or [UP+NOR].
(2) Push [DOWN-REV] or [UP-NOR] fo select the
desired satellite memory channel,
@) Push [VFO] to select the satellite VFO mode if
desired.
- Memory programming can be performed in both the
satellite VFO and satellite memory modes.
(4) Select the desired eae and modes for
uplink and downlink.
(©) Push and hold [MW] for 2 sec. to program the set
contents to the satellite memory channel.
SATELLITE OPERATION 10
i Satellite VFO and satellite memory
Memory programming and memory transferring can
be performed in the same manner as normal memory
mode operation.
SATELLITE MEMORY MODE
The satellite memory mode keeps programmed fre-
quencies and modes until they are overwritten.
These memory channels are convenient for pro-
gramming data for individual satellites.
To select the satellite VFO along with set frequen-
cies:
e Push [FUNC], then push and hold [DOWNeREV] or
[UP-NOR] for 2 sec.
@aiNiea then (DOWN
Push and hold
The satellite VFO with a transferred
freq./mode is selected
Eis i en |
off. F ILLS
The freq./mode selected in the satellite mode can also be
transferred to normal VFOs in the same way.
[EXAMPLE]: Programming 435.54 (LSB) / 145.88
(USB) into satellite memory channel 1.
Batic then (DOWN) Select satellite mode
ie