ADEEPT AWR Wheeled Robot Manual page 18

9
3. Install the `Raspberry Pi Imager`
4. Download the image file `Adeept_AWR`
- [Image file for the Adeept_AWR
5. Unzip the file, be noted that the path should be in English for the `.img` file extracted, no special
characters allowed.
6. Write the image file `Raspbian` downloaded to the SD card with `Raspberry Pi Imager`
7. Leave the SD card connected after writing is completed, we'll use for configuring SSH and WiFi
connection later.
Detailed Steps:
●Open a web browser on your computer, go to the Raspberry Pi website
find and download the Raspberry Pi Imager for your computer OS, or click on the links above for the
corresponding system to directly download and install.
● Go to our [official
Unzip the file, be noted that the path should be in English for the .img file extracted, no special characters
allowed. otherwise Raspberry Pi Imager may not open the .img file. It's recommended to save the .img file to the
root directory of the C:\ or D:\ disk,
●Insert the SD card into the card reader, connect the card reader and your computer.
●Run the Raspberry Pi Imager, select CHOOSE OS, and then Use custom to find the .img extracted, click
Open.
●Select CHOOSE SD CARD for the SD card to write the Raspbian, please be noted that the image writing
Robot]
website], find and download the image file
but do not save .img on the SD
[Official Raspberry Pi
[Image file for the Adeept_AWR
card.
website],
Robot].