Method C: Manually Download The Image File Provided By Us And Write It To The Sd Card (Not Recommended) - ADEEPT AWR Wheeled Robot Manual

8

●Do not remove the SD card connected after writing is completed, we'll use for configuring SSH and WiFi
connection later. Otherwise, if you remove the card, insert it into the Raspberry Pi and boot it up, WiFi
configuration without any peripherals may fail in the following process.
2.1.3 Method C: Manually Download The Image File Provided by Us and Write It to The SD Card (Not
Recommended)
● The Raspbian image file downloaded in 2.1.1 and 2.1.2 is the official source with some preinstalled
software. To operate the robot, you may need many dependent libraries. Though we provide the simple script to
install them (see details later), failure can happen during installation if the library is not the latest version.
Therefore, despite we provide the downloading of the Raspbian image file, it may happen that our image file and
the dependent libraries are not most updated versions. Please only use when you encounter the most
troublesome situation.
●Step-by-Step Overview
1. Prepare an SD card (16G or larger) and an SD card reader
2. Download the `Raspberry Pi Imager` from the official website
- [Raspberry Pi Imager for
[Raspberry Pi Imager for
-
[Raspberry Pi Imager for
-
Windows]
macOS]
Ubuntu]
[Official Raspberry Pi website]