Method B: Download The Image File Raspbian And Write It To The Sd Card Manually - ADEEPT AWR Wheeled Robot Manual

5
●Do not remove the SD card connected after writing is completed, we'll use for configuring SSH and WiFi
connection later. Otherwise, if you remove the card, insert it into the Raspberry Pi and boot, WiFi configuration
without any peripherals may fail in the following process.

2.1.2 Method B: Download The Image File Raspbian and Write It to The SD Card Manually

●Since the image file is downloaded with Raspberry Pi Imager in 2.1.1, it can take a long time due to a slow
network in some places. You may then manually download the image file Raspbian and write it to the SD card
with th Raspberry Pi Imager.
Step-by-Step Overview

 1. Prepare an SD card (16G or larger) and an SD card reader
2. Download the `Raspberry Pi Imager` on the official website

- [Raspberry Pi Imager for

- [Raspberry Pi Imager for

- [Raspberry Pi Imager for

3. Install the `Raspberry Pi Imager`

Windows]
macOS]
Ubuntu]
[Official Raspberry Pi Website]