Setting The Vox Function - Icom IC-F29SR2 Operating Manual

4
SETTINGS

Setting the VOX function

You can turn the VOX function ON or OFF. The VOX
function automatically switches between receive and
transmit during voice operation.
NOTE: Turn ON the Beep function before you start
setting the VOX function. (p. 6)
1. Rotate [VOL] to turn OFF the transceiver power.
2. Set [ROTARY SELECTOR] to any channel other
than Channel 16.
3. While holding down [PTT] and [Upper], rotate
[VOL] to turn ON the transceiver, to turn the VOX
function ON or OFF.
• When the VOX function is ON, a beep and an opening
beep sound, and then the selected channel number is
announced.
• When the VOX function is OFF, two beeps and an
opening beep sound, and then the selected channel
number is announced.
4. Rotate [VOL] to turn OFF the transceiver, then
turn ON again to restart the normal operation.
[ROTARY SELECTOR]
[PTT]
[Upper]
11
[VOL]