Setting The Vox Function - Icom IC-F29DR2 Operating Instructions Manual

Previous view
4
SETTINGS

Setting the VOX function

You can turn the VOX function ON or OFF. The VOX
function automatically switches between receive and
transmit using your voice.
NOTE: Turn ON the Beep function (p. 7) before
you start setting the VOX function.
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to any channel other than
Channel 16.
3. While holding down [PTT] and [Upper], rotate
[VOL] to turn ON the transceiver, to turn the VOX
function ON or OFF.
• When the VOX function is ON, an opening beep and a
beep sounds, and then the selected channel number
is announced.
• When the VOX function is OFF, an opening beep
and two beeps sound, and then the selected channel
number is announced.
4. Rotate [VOL] to turn OFF the transceiver, then
turn ON again to restart normal operation.
[Rotary Selector]
[PTT]
[Upper]
13
[VOL]