Setting The Vox Function - Icom IC-F29DR Operating Instructions Manual

Dpmr446/pmr446 transceiver

Hide thumbs Also See for IC-F29DR:

Table of Contents

SETTINGS

Setting the VOX function

You can turn the VOX function ON or OFF. The VOX

function automatically switches between receive and

transmit during voice operation.

NOTE:

Turn ON the Beep function (p. 7) before you start

setting the VOX function.

1) Rotate [VOL] to turn OFF the transceiver power.

2) Set [Rotary Selector] to any channel other than

Channel 16.

3) W hile holding down [PTT] and [Upper], rotate

[VOL] to turn ON the power, to turn the VOX

function ON or OFF.

• W hen the VOX function is ON, an opening beep and a

beep sounds, and then the selected channel number

will be announced.

• W hen the VOX function is OFF, an opening beep

and two beeps sound, and then the selected channel

number will be announced.

4) Rotate [VOL] to turn OFF the power, then turn ON

again to restart normal operation.

[Rotary Selector]

[PTT]

[Upper]

[VOL]

Table of Contents

Do you have a question about the IC-F29DR and is the answer not in the manual?