Table of Contents
Advertisement
NET-4/5 IP, 5-pin
Replacing the Fuse
DANGER
Electric shock caused by short-circuit
●
Do not bypass the thermostatic switch or fuses.
●
For replacement use fuses of the same type and rating only.
Power surges, short-circuit or incorrect electrical power supply may cause a fuse to burn out. If the fuse
burns out, the device will not function anymore. If this happens, follow the steps below:
01) Disconnect the device from the electrical power supply.
Allow the device to cool down for at least 5 minutes.
Loosen the fuse cover by hand and remove the fuse holder.
If the fuse is brown or unclear, it is burned out. Remove the old fuse.
Insert a new fuse in the fuse holder. Make sure that the type and the rating of the replacement fuse
are the same as the ones specified on the information label of the product.
Replace the fuse holder in the opening and tighten the fuse cover.
Product code: 50818
33
Advertisement
Table of Contents
Need help?
Do you have a question about the NET-4/5 IP and is the answer not in the manual?
Questions and answers