Table of Contents
Advertisement
(Optional) Mounting The Serial Device Server With DIN Rail
1. Align the DIN Rail Bracket with the DIN Rail Mounting Holes on the bottom
of the Serial Device Server.
2. Using the included DIN Rail Mounting Screws and a Phillips Head
Screwdriver, secure the DIN Rail Kit to the Serial Device Server.
3. Insert the DIN Rail Mounting Plate at an angle starting from the Top, then
Push it against the DIN Rail.
(Optional) Mounting The Serial Device Server To A Wall Or
Other Surface
1. Secure the Serial Device Server to the desired Mounting Surface using the
appropriate Mounting Hardware (i.e., wood screws) through the
Wall Mounting Bracket Holes.
Install the Serial Device Server
1. Connect the included Power Supply or a 5V~24V DC Power Source to the
Serial Device Server.
Note: The Serial Device Server can take up to 80 seconds to startup.
2. Connect an Ethernet Cable from the RJ-45 Port of the Serial Device Server
to a Network Router, Switch, or Hub.
3. Connect an RS-232 Serial Device to the DB-9 Port on the Serial Device
Server.
Software Installation
1. Navigate to:
www.StarTech.com/I23-SERIAL-ETHERNET
or
www.StarTech.com/I43-SERIAL-ETHERNET
2. Click the Drivers/Downloads tab.
3. Under Driver(s), download the Software Package for Windows Operating
System.
4. Extract the contents of the downloaded .zip file.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
10
Advertisement
Table of Contents
Need help?
Do you have a question about the I23-SERIAL-ETHERNET and is the answer not in the manual?
Questions and answers