Table of Contents
Advertisement
3. When the Settings Window opens, use the drop down menus to change
Baud Rate, Data Bits, COM Port Number, and more.
Note: If changing the COM Port Number, see "Changing COM Port or Baud
Rate in Windows" on Page 15.
4. Select "Apply Changes" to save the settings.
In the Web Interface
1. Open a web browser.
2. Type the IP address of the Serial Device Server into the address bar.
3. Enter the password and select "Login". See Default Password on Page 6.
4. Select the "Serial Settings" to expand the options.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15
Advertisement
Table of Contents
Need help?
Do you have a question about the I23-SERIAL-ETHERNET and is the answer not in the manual?
Questions and answers