Software Installation And Configuration - StarTech.com NETRS232 Quick Installation Manual

3
Software installation and configuration consists of the following:
A. Running the NETRS232 setup software
B. Configuring network settings
C. Activating and deactivating NETRS232 ports
D. Optional advanced port configuration
E. Upgrading software
A. Running the NETRS232 setup software
The installation diskette has files to
install NETRS232 drivers on your PC and
to detect NETRS232 devices on your
network.To run the installation software,
insert the installation diskette and run
"Setup.exe".The Setup Wizard will ask
you to supply basic installation
information.
The Setup Wizard will finish by opening
the IP-Extender Manager
IP-Extender Manager
NETRS232 devices that it has detected on
your network.
The IP-Extender Manager
interface. Any NETRS232 devices that are discovered on your network are displayed in
the "IP-Extenders Near Me" branch of the "My IP-Extender Network" tree.
NETRS232 devices installed on your network will need unique IP addresses.These can
be set by using either the
The factory default network settings for the NETRS232 are:
IP address:
Subnet mask:
Gateway address: 0.0.0.0
Name:
Workgroup:
DHCP detection:
Software Installation
and Configuration
. By default the
will display
B. Configuring network settings
displays NETRS232 information in a Windows Explorer-like
IP-Extender Manager,
192.168.0.35
255.255.255.0
[empty]
[empty]
disabled
a web browser, or a Telnet client.