Software Installation; Operation - StarTech.com NETRS232 Instruction Manual

Software Installation

1. Connect the device server's RJ45 interface to your Local Area Network (LAN).
Note: Alternatively, you can also use a crossover cable to connect the device server
directly to your system for the initial configuration.
2. Insert the provided CD into your DVD/CD-ROM drive.
3. Browse to the folder "\VCOM driver" and execute the "vcomsetup.exe" installer.
4. Follow the on-screen instructions to complete the installation of the VCOM and
WinPcap software.

Operation

1. Start the software by launching the VCOM shortcut.
2. Click the Search button in the VCOM software window to locate the device.
Instruction Manual
5