NEX ROBOTICS SPARK V ATMEGA16 Hardware Manual page 84

SPARK V ATMEGA16 Hardware Manual
Go the "Fuse" tab while robot is powered on and AVRISP mkII is connected. Press "Read"
button. All the fuse settings will be visible.
Brown-out detection is disabled.
JTAGEN is set at Brown-out detection at VCC=2.7V
Boot size is at 4096 words with start address = $1C00
SUT_CKSEL is set at External crystal greater than 8MHz with startup time of 64ms
If needed you can set appropriate Fuse setting and write it by pressing "Program" button.
© NEX Robotics Pvt. Ltd. and ERTS Lab IIT Bombay, INDIA 84