NEX ROBOTICS SPARK V ATMEGA16 Hardware Manual page 59

Press "F11" key or "Step into" button
statement. Processor details are visible at left window and the I/O port status is displayed at the
rightmost window.
By this way we can continuously monitor the bit changes in any of the registers of
microcontroller and debug the code before actually burning it to the microcontroller. PORTC bits
changes as per our commands and these changes can be seen in right window. After debugging is
done select "Stop Debugging" from Debug tab.
© NEX Robotics Pvt. Ltd. and ERTS Lab IIT Bombay, INDIA
SPARK V ATMEGA16 Hardware Manual
from the toolbar to start debugging statement by
Figure 4.28
Figure 4.29
59