Download Print this page

MS ENERGY VORTEX Original Instruction Manual page 304

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 303
ENG 
Before STARTING THE E-SCOOTER FOR
THE FIRST TIME, be sure to connect the e-
scooter to the attached original charger
and let it CHARGE the Battery fully (the
light on the charger will change from red
to green)!
OTHERWISE, IT IS NOT POSSIBLE TO
 When storing the electric scooter for a long period, make sure the
battery  is  at  70‐80  %  charged.  It  is  advisable  to  charge  your
scooter minimum once per 30 days.
 Do not leave your electric scooter with a significantly discharged
battery for a few hours. Charge it promptly!
 Always  use  only  the  original  charger  that  corresponds  to  the
model of the scooter.
 Do not leave your electric scooter in the cold temperature below
5°C  or  under  the  direct  sun.  Keep  the  battery  dry.  Negative
environmental conditions can damage the battery capacity.
 Before  each  ride,  always  check  that  the  e‐scooter  is  in  good
condition, that there are no any loose parts. If you find any loose
parts, tighten them immediately with provided tools. On this way
you will always ensure a safe ride and a longer lifespan of your
scooter.
WARNING
START THE E-SCOOTER.
IMPORTANT 

Advertisement

loading
Need help?

Need help?

Do you have a question about the VORTEX and is the answer not in the manual?

Questions and answers

Riki
April 16, 2025

For some option password is required, please inform me what is the default password. I have an MS energy Vortex