Attach Handlebar - MS ENERGY VORTEX Original Instruction Manual

ENG
ATTACH HANDLEBAR
A. Frist,remove the
vertical cover and the
screws on the vertical.
D. After that,place the
handle in the correct
position.
Incorrect assembIy,maintenance,or use of your Vortex scooter can cause component or
performance faiIure, Ioss of controI,serious injury or death.you must read and understand
the entire manuaI and other accessories before riding.If you have any probIem,weIcome
to our officiaI website.
B. Then, remove the screws
from the handlebar clamp,
and then remove the upper
part clamp
E. Penultimate step,Install the
handlebar clamp and then
install the four screws
C. Next, straighten the
F. As the final step, place
13
display and pay
attention to the wiring
of the display.
the instrument upright
and tighten the screws
on the vertical cover.