User Interfaces - Tadiran Telecom T41P User Manual

Overview
Line key LED (configured as a BLF key or a BLF List key)
LED Status
Solid green
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off
Line key LED (used as a page switch key)
LED Status
Solid red
Solid green
Fast flashing green
Fast flashing red
Off

User Interfaces

Two ways to customize configurations of your T41P IP phone:
The user interface on the IP phone.

The user interface in a web browser on your computer.

The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many cases, it is possible to use either the phone
user interface and/or the web user interface interchangeably. However, in some cases,
it is only possible to use one or the other interface to operate the phone and change
settings.
Description
The monitored user is idle.
The monitored user receives an incoming call.
The monitored user is busy
The call is parked against the monitored user's phone
number.
The monitored user's conversation is placed on hold
(This status requires server support).
The monitored user does not exist.
Description
There is a parked call on the line key of the non-current
page.
There is a call on the line key of the non-current page.
The line receives an incoming call on the non-current
page.
The monitored user receives an incoming call on the
non-current page.
Line keys on every page are idle.
5