Table of Contents
Advertisement
READ Function
Reads out the constants in batch from the Inverter and stores them in
EEPROM inside the Digital Operator. When the read-out is executed,
the previously stored constants data in the EEPROM are cleared and
replaced with the newly entered constants.
Example: Storing Constants from Inverter in EEPROM in Operator
• Enable the set-
ting of con-
stants n001 to
n179.
• Set Constant
Read Prohibited
Selection
(n177) to read-
*1
enabled.
164
Explanation
• Press
DSPL
PRGM
will light.
• Press
ENTER
play the set value.
• Change the set value to
4 by pressing the
key.
• Press
ENTER
• Change the constant No.
to n177 by pressing the
or
key.
• Press
ENTER
play the set value.
• Change the set value to
1 by pressing the
key.
• Press
ENTER
and
(May be a different constant number)
(Lit)
to dis-
(May be a different set value.)
(Flashes)
or
(Lit for one second.)
.
(The constant number is displayed.)
(Lit)
to dis-
(Flashes)
or
.
(Lit for one second.)
(The constant number is displayed.)
Operator Display
Advertisement
Table of Contents
