Single Read Function - Omron RX Series User Manual

6 Read/Write Functions
6-1

Single READ Function

The Single READ function is enabled when 5. R/W Storage Mode in the OPTION MODE menu is set to
"01: Single".
The Single Read function is executed immediately just by pressing the
The Single READ function reads a single set of Inverter parameter setting data and a Drive
Programming program and stores them to the LCD Digital Operator. When reading is completed, the
screen returns to the previous screen.
This is time-saving when you need to repeat the all read/write operations.
Precautions for Correct Use Precautions for Correct Use
• The Single READ function cannot be executed by pressing the
or Option Mode.
Use this function in other modes.
• The Single READ function overwrites the data existing in the LCD Digital Operator because its
memory is set to store a single set of Inverter data.
• This function attempts to read a Drive Programming program even when it is not stored in the
Inverter. At that time, it stores the status of no Drive Programming program.
6 - 2
After a read operation is completed, the screen
returns to the previous screen automatically.
Reading parameter setting
data
Automatic
transition
key.
Reading completed
Reading a Drive
Automatic
Programming program
transition
key in the Write Mode
LCD Digital Operator User's Manual (I579)