While a constant number that is not the same is displayed or a constant
value is displayed, press
verification. End will be displayed. Press
to the constant number display.
Inverter Capacity Display
The voltage class and maximum applicable motor capacity for which
constants are stored in the Digital Operator are displayed.
Example: Displaying Voltage Class and Maximum Applicable Motor
• Enable the
setting for
constants
n001 to
n179.
• Execute
Inverter
Capacity
Display
(vA) using
the Con-
stant Copy
Function
Selection
(n176).
170
Capacity for Inverter whose Constants are in EEPROM in
Operator
Explanation
• Press
DSPL
PRGM
will light.
• Press
ENTER
the set value.
• Change the set value to 4
by pressing the
• Press
.
ENTER
• Change the constant num-
ber to n176 by pressing the
or
key.
• Press
ENTER
the set value.
• Change the set value to vA
by pressing the
• Press
.
ENTER
• Press
DSPL
.
ENTER
to interrupt the execution of the
STOP/RESET
and
(May be a different constant number)
(Lit)
(May be a different set value.)
to display
(Flashes)
or
key.
(Lit for one second.)
(The constant number is displayed.)
to display
or
key.
or
(The constant number is displayed.)
or
ENTER
DSPL
Operator Display
(Lit)
(Lit)
(Lit) (For 20P7)*
to return