Setting Frequency By Current Reference Input - Omron V7-IP65 User Manual

Setting Frequency by Current Reference Input

When setting the frequency by
inputting a current reference (4 to
20 mA or 0 to 20 mA) from the
control circuit terminal FR, switch
the DIP switch SW2 on the con-
trol circuit board to the "I" side.
NOTE
120
Never input a voltage reference to control circuit terminal FR
when DIP switch SW2 is switched to the "I" side. The
Inverter might be damaged.
SW2
DIGITAL
OPERATOR
JVOP-147