Table of Contents
Advertisement
* 1. Based on a standard 4-pole motor for max. applicable motor output.
* 2. Shows deceleration torque for uncoupled motor decelerating from 60 Hz
with the shortest possible deceleration time.
* 3. The ground fault here is one which occurs in the motor wiring while the
motor is running. A ground fault may not be detected in the following
cases.
• A ground fault with low resistance which occurs in motor cables or ter-
minals.
• A ground fault occurs when the power is turned ON.
* 4. Minimum permissible load: 5 VDC, 10 mA (as reference value)
* 5. For details, refer to "Carrier Frequency Selection (n080)14kHz max" on
page 89.
* 6. Temperature during shipping (for short period).
210
Advertisement
Table of Contents
