Maintenance; Maintenance General - HANGCHA Mini Range CDD12-A2MJ-SZ Operation And Maintenance Manual

9

Maintenance

9.1 Maintenance general

– The forklift truck needs inspection and maintenance periodically, to make it in good working
condition.
Inspection and maintenance are usually ignored, you'd better find out the problems early and
–
solve it in time.
– Use authentic parts of Hangcha Group.
Don't use different oil when changing or adding oil. Don't rave about oil and electrolyte used
–
at will, and carry on handling according to the local environmental protection laws and
regulations.
–
Draw up complete maintenance plan.
After you make maintenance, you'd better make a record.
–
Forbid to repair the forklift truck if you haven't been trained.
–
– Final de-commissioning or disposal of the truck in must be performed in accordance with the
regulations of the country of use. In particular, regulations governing the disposal of batteries,
fuels and electronic and electrical systems must be observed.
CAUTION

No fire.

You should shut off key switch and pull off the plug before service.（except some
trouble shooting）.

Clean the electric part with compress air, and do not with water.

Do not stretch your hands, feet or any part of body into the gap between the mast
and instrument.

When the working environment is severe, maintain in advance.
37