Battery Charging; Power Interface; Battery Charging Steps - HANGCHA Mini Range CDD12-A2MJ-SZ Operation And Maintenance Manual

5.3 Battery charging

That is, during truck operation the battery discharge process, the battery over-discharge is
prohibited. After the truck is running, it is timely to charge the battery.
WARNING

The truck comes with charger, the charger charging power supply must be
single-phase power frequency AC power.It's prohibited to use DC, AC two
phase/three phase and other non single phase AC to charge the battery.

5.3.1 Power interface

– Input voltage: 85～265VAC
–
Input frequency: 47～63Hz
– Input current: 1.5～3.5A

5.3.2 Battery charging steps

Procedure:
– Park the truck securely.
– Remove the charging plug(5) from fixator(36) , and
plug in proper power socket.
–
Charge the battery until the green light of charging
indicator (4) continually lights up.
–
Remove charging plug(5) from the power socket
and plug into the fixator(36).
CAUTION

When the battery capacity is lower than 40%,
please charge.

Truck travelling function is prohibited when
charging.

Do not suspend
charged.
charging before
23
fully