HANGCHA Mini Range CDD12-A2MJ-SZ Operation And Maintenance Manual page 20

8) Internal battery may generate explosive
gas, it's prohibited any flame close the
battery. Never allow the tools close two
poles of the battery to avoid spark or
short circuit.
9) The work ground of forklift shall be solid
and smooth concrete surface or similar
ones. Pre-check the ground condition of
working site. Tidy the working site, clean
obstacle, sweep macadam, muddy sand
and wipe off greasy dirt.
10) Do not overload. Before operation, first
know the curve chart on the load curve
plate well, which indicates the relation
between rated load and load center.
11) Before start, press the horn and make
sure no people around.
12) Goods are not allowed to deviate the
fork center, when goods is deviating the
fork center, turn or pass uneven road,
you are easily to fall. Meanwhile,
possibility of turnover will increase.
13) Avoid sudden drive, stop or turn.
14) Do not drive the truck when the forks in
high position.
15) When handling bulky loads, which
restrict your vision, please operate the
machine in reverse or have a guide.
16) Cause the wheels of pallet truck is small,
it is not allowed to run on the street, and
only for driving in specified stacking
place.
17) It's forbidden to put the head, hand, foot
or body under the forks. Never stand on
the fork.
16
WARNING